uIP type definitions

Collaboration diagram for uIP type definitions:

Modules
	general configuration options
	CPU architecture configuration

Macros
#define	LIBC_MEMFUNCREPLACE   0
#define	MAX_NUM_CLIENTS   6 /* Maximum number of connected Bluetooth clients. No more than 6 */
#define	MAX_NUM_OPT_CLIENTS   10 /* Maximum number of possible Bluetooth clients we might listen to */
#define	MEMB_NUM_HCI_PCB   1 /* Always set to one */
#define	MEMB_NUM_HCI_LINK   MAX_NUM_CLIENTS /* One for DT + One per ACL connection */
#define	MEMB_NUM_HCI_INQ   256 /* One per max number of returned results from an inquiry */
#define	MEMB_NUM_HCI_LINK_KEY   256 /* One per max number of returned results from an read stored link key */
#define	MEMB_NUM_L2CAP_PCB   (2 + 2 * MAX_NUM_CLIENTS) /* One for a closing connection + one for DT + one per number of connected Bluetooth clients */
#define	MEMB_NUM_L2CAP_PCB_LISTEN   (2 * MAX_NUM_OPT_CLIENTS) /* One per listening PSM */
#define	MEMB_NUM_L2CAP_SIG   (2 * MAX_NUM_CLIENTS)/* Two per number of connected Bluetooth clients but min 2 */
#define	MEMB_NUM_L2CAP_SEG   (2 + 2 * MAX_NUM_CLIENTS) /* One per number of L2CAP connections */
#define	MEMB_NUM_SDP_PCB   MAX_NUM_CLIENTS /* One per number of connected Bluetooth clients */
#define	MEMB_NUM_SDP_RECORD   1 /* One per registered service record */
#define	MEMP_NUM_RFCOMM_PCB   (2 + 2 * MAX_NUM_CLIENTS) /* Two for DT + Two per number of connected Bluetooth clients */
#define	MEMP_NUM_RFCOMM_PCB_LISTEN   (2 * MAX_NUM_CLIENTS) /* Two per number of connected Bluetooth clients */
#define	MEMP_NUM_HIDP_PCB   (2 + 2 * MAX_NUM_CLIENTS) /* Two for DT + Two per number of connected Bluetooth clients */
#define	MEMP_NUM_HIDP_PCB_LISTEN   (2 * MAX_NUM_CLIENTS) /* Two per number of connected Bluetooth clients */
#define	MEMP_NUM_PPP_PCB   (1 + MAX_NUM_CLIENTS) /* One for DT + One per number of connected Bluetooth clients */
#define	MEMP_NUM_PPP_REQ   MAX_NUM_CLIENTS /* One per number of connected Bluetooth clients but min 1 */
#define	MEMP_NUM_BTE_PCB   (2 + 2 * MAX_NUM_CLIENTS) /* Two for DT + Two per number of connected Bluetooth clients */
#define	MEMP_NUM_BTE_PCB_LISTEN   (2 * MAX_NUM_CLIENTS) /* Two per number of connected Bluetooth clients */
#define	MEMP_NUM_BTE_CTRLS   256
#define	HCI   1
#define	HCI_HOST_MAX_NUM_ACL   20
#define	HCI_HOST_ACL_MAX_LEN
#define	HCI_PACKET_TYPE   0xCC18 /* Default DM1, DH1, DM3, DH3, DM5, DH5 */
#define	HCI_ALLOW_ROLE_SWITCH   1 /* Default 1 */
#define	HCI_FLOW_QUEUEING   0 /* Default: 0 */
#define	L2CAP_HCI   1
#define	L2CAP_CFG_QOS   0
#define	L2CAP_MTU
#define	L2CAP_OUT_FLUSHTO
#define	L2CAP_RTX   60
#define	L2CAP_ERTX   300
#define	L2CAP_MAXRTX   0
#define	L2CAP_CFG_TO   30
#define	HIDD_N
#define	RFCOMM_K   0
#define	RFCOMM_TO   20
#define	RFCOMM_FLOW_QUEUEING   0 /* Default: 0 */

Typedefs
typedef u8	u8_t
typedef s8	s8_t
typedef u16	u16_t
typedef s16	s16_t
typedef s32	s32_t
typedef u32	u32_t
typedef u16	uip_stats_t
typedef u8	u8_t
typedef s8	s8_t
typedef u16	u16_t
typedef s16	s16_t
typedef s32	s32_t
typedef u32	u32_t
typedef u64	u64_t
typedef s64	s64_t
typedef s8	err_t

Detailed Description

Macro Definition Documentation

HCI

#define HCI   1

HCI_ALLOW_ROLE_SWITCH

#define HCI_ALLOW_ROLE_SWITCH   1 /* Default 1 */

HCI_FLOW_QUEUEING

#define HCI_FLOW_QUEUEING   0 /* Default: 0 */

HCI_HOST_ACL_MAX_LEN

#define HCI_HOST_ACL_MAX_LEN

Value:

1691 /* Default: RFCOMM MFS + ACL header size, L2CAP header size,
                                                RFCOMM header size and RFCOMM FCS size */

HCI_HOST_MAX_NUM_ACL

#define HCI_HOST_MAX_NUM_ACL   20

HCI_PACKET_TYPE

#define HCI_PACKET_TYPE   0xCC18 /* Default DM1, DH1, DM3, DH3, DM5, DH5 */

HIDD_N

#define HIDD_N

Value:

672          /* Default: Worst case byte stuffed PPP packet size +
                                                                 non-compressed PPP header size and FCS size */

L2CAP_CFG_QOS

#define L2CAP_CFG_QOS   0

L2CAP_CFG_TO

#define L2CAP_CFG_TO   30

L2CAP_ERTX

#define L2CAP_ERTX   300

L2CAP_HCI

#define L2CAP_HCI   1

L2CAP_MAXRTX

#define L2CAP_MAXRTX   0

L2CAP_MTU

#define L2CAP_MTU

Value:

(HIDD_N + 1)/* Default for this implementation is RFCOMM MFS + RFCOMM header size and
                                                         RFCOMM FCS size while the L2CAP default is 672 */

L2CAP_OUT_FLUSHTO

#define L2CAP_OUT_FLUSHTO

Value:

0xFFFF /* Default: 0xFFFF. Infinite number of retransmissions (reliable channel)
                                                  The value of 1 implies no retransmissions at the Baseband level
                                                  should be performed since the minimum polling interval is 1.25 ms.*/

L2CAP_RTX

#define L2CAP_RTX   60

LIBC_MEMFUNCREPLACE

#define LIBC_MEMFUNCREPLACE   0

MAX_NUM_CLIENTS

#define MAX_NUM_CLIENTS   6 /* Maximum number of connected Bluetooth clients. No more than 6 */

MAX_NUM_OPT_CLIENTS

#define MAX_NUM_OPT_CLIENTS   10 /* Maximum number of possible Bluetooth clients we might listen to */

MEMB_NUM_HCI_INQ

#define MEMB_NUM_HCI_INQ   256 /* One per max number of returned results from an inquiry */

MEMB_NUM_HCI_LINK

#define MEMB_NUM_HCI_LINK   MAX_NUM_CLIENTS /* One for DT + One per ACL connection */

MEMB_NUM_HCI_LINK_KEY

#define MEMB_NUM_HCI_LINK_KEY   256 /* One per max number of returned results from an read stored link key */

MEMB_NUM_HCI_PCB

#define MEMB_NUM_HCI_PCB   1 /* Always set to one */

MEMB_NUM_L2CAP_PCB

#define MEMB_NUM_L2CAP_PCB   (2 + 2 * MAX_NUM_CLIENTS) /* One for a closing connection + one for DT + one per number of connected Bluetooth clients */

MEMB_NUM_L2CAP_PCB_LISTEN

#define MEMB_NUM_L2CAP_PCB_LISTEN   (2 * MAX_NUM_OPT_CLIENTS) /* One per listening PSM */

MEMB_NUM_L2CAP_SEG

#define MEMB_NUM_L2CAP_SEG   (2 + 2 * MAX_NUM_CLIENTS) /* One per number of L2CAP connections */

MEMB_NUM_L2CAP_SIG

#define MEMB_NUM_L2CAP_SIG   (2 * MAX_NUM_CLIENTS)/* Two per number of connected Bluetooth clients but min 2 */

MEMB_NUM_SDP_PCB

#define MEMB_NUM_SDP_PCB   MAX_NUM_CLIENTS /* One per number of connected Bluetooth clients */

MEMB_NUM_SDP_RECORD

#define MEMB_NUM_SDP_RECORD   1 /* One per registered service record */

MEMP_NUM_BTE_CTRLS

#define MEMP_NUM_BTE_CTRLS   256

MEMP_NUM_BTE_PCB

#define MEMP_NUM_BTE_PCB   (2 + 2 * MAX_NUM_CLIENTS) /* Two for DT + Two per number of connected Bluetooth clients */

MEMP_NUM_BTE_PCB_LISTEN

#define MEMP_NUM_BTE_PCB_LISTEN   (2 * MAX_NUM_CLIENTS) /* Two per number of connected Bluetooth clients */

MEMP_NUM_HIDP_PCB

#define MEMP_NUM_HIDP_PCB   (2 + 2 * MAX_NUM_CLIENTS) /* Two for DT + Two per number of connected Bluetooth clients */

MEMP_NUM_HIDP_PCB_LISTEN

#define MEMP_NUM_HIDP_PCB_LISTEN   (2 * MAX_NUM_CLIENTS) /* Two per number of connected Bluetooth clients */

MEMP_NUM_PPP_PCB

#define MEMP_NUM_PPP_PCB   (1 + MAX_NUM_CLIENTS) /* One for DT + One per number of connected Bluetooth clients */

MEMP_NUM_PPP_REQ

#define MEMP_NUM_PPP_REQ   MAX_NUM_CLIENTS /* One per number of connected Bluetooth clients but min 1 */

MEMP_NUM_RFCOMM_PCB

#define MEMP_NUM_RFCOMM_PCB   (2 + 2 * MAX_NUM_CLIENTS) /* Two for DT + Two per number of connected Bluetooth clients */

MEMP_NUM_RFCOMM_PCB_LISTEN

#define MEMP_NUM_RFCOMM_PCB_LISTEN   (2 * MAX_NUM_CLIENTS) /* Two per number of connected Bluetooth clients */

RFCOMM_FLOW_QUEUEING

#define RFCOMM_FLOW_QUEUEING   0 /* Default: 0 */

RFCOMM_K

#define RFCOMM_K   0

RFCOMM_TO

#define RFCOMM_TO   20

Typedef Documentation

err_t

typedef s8 err_t

The statistics data type.

This datatype determines how high the statistics counters are able to count.

s16_t [1/2]

typedef s16 s16_t

The 16-bit signed data type.

This may have to be tweaked for your particular compiler. "unsigned short" works for most compilers.

s16_t [2/2]

typedef s16 s16_t

The 16-bit signed data type.

This may have to be tweaked for your particular compiler. "unsigned short" works for most compilers.

s32_t [1/2]

typedef s32 s32_t

The 32-bit signed data type.

This may have to be tweaked for your particular compiler. "unsigned short" works for most compilers.

s32_t [2/2]

typedef s32 s32_t

The 32-bit signed data type.

This may have to be tweaked for your particular compiler. "unsigned short" works for most compilers.

s64_t

typedef s64 s64_t

The 64-bit signed data type.

This may have to be tweaked for your particular compiler. "unsigned short" works for most compilers.

s8_t [1/2]

typedef s8 s8_t

The 8-bit signed data type.

This may have to be tweaked for your particular compiler. "unsigned char" works for most compilers.

s8_t [2/2]

typedef s8 s8_t

The 8-bit signed data type.

This may have to be tweaked for your particular compiler. "unsigned char" works for most compilers.

u16_t [1/2]

typedef u16 u16_t

The 16-bit unsigned data type.

This may have to be tweaked for your particular compiler. "unsigned short" works for most compilers.

u16_t [2/2]

typedef u16 u16_t

The 16-bit unsigned data type.

This may have to be tweaked for your particular compiler. "unsigned short" works for most compilers.

u32_t [1/2]

typedef u32 u32_t

The 32-bit unsigned data type.

This may have to be tweaked for your particular compiler. "unsigned short" works for most compilers.

u32_t [2/2]

typedef u32 u32_t

The 32-bit unsigned data type.

This may have to be tweaked for your particular compiler. "unsigned short" works for most compilers.

u64_t

typedef u64 u64_t

The 64-bit unsigned data type.

This may have to be tweaked for your particular compiler. "unsigned short" works for most compilers.

u8_t [1/2]

typedef u8 u8_t

The 8-bit unsigned data type.

This may have to be tweaked for your particular compiler. "unsigned char" works for most compilers.

u8_t [2/2]

typedef u8 u8_t

The 8-bit unsigned data type.

This may have to be tweaked for your particular compiler. "unsigned char" works for most compilers.

uip_stats_t

typedef u16 uip_stats_t

The statistics data type.

This datatype determines how high the statistics counters are able to count.